Adding Arc Flash Incident Energy and Short Circuit Current to Display on the Panel Schedule
The scope of arc flash studies now often include 240 and 120 volt panels and loads. Facility managers ask for the information to be included on the panel schedule so it can be displayed on the panel. This refresher webinar by Jim Chastain describes how panel schedule templates can be modified to include this requested information.
Download a Free Demov2076
Jim's Example Files
The following files are the examples that Jim used in his presentation. Save them to the >> EasyPower 11.0 > Templates folder in your installation. If the files don't download properly, you can download the zip file, which if you are using Chrome also may not download, for security reasons, then you can right-click on it and select Open link in new tab.
If your security doesn't allow you to download unknown file types (.ezpnl), you can download the following Zip folder and follow the instructions in the PDF. If you are using Chrome and it doesn't allow you to download zip files, for security reasons, then you can right-click on it and select Open link in new tab.