Why Doesn't EasyPower Recognize the "Up-Over-Down Method" for Load Equipment Duty

In this Refresher webinar, Jim Chastain, an EasyPower application engineer, takes a closer look at the information displayed on the TCC plots and how to evaluate options to reduce downstream short circuit fault current. This is good information for new EasyPower users as well as a good refresher for EasyPower veterans.

Download a Free Demov2360

 

Jim's Presentation Slides

Click on the Fullscreen Mode  in the lower right corner to view as a full screen presentation. Press the Esc key to exit full screen more.