Your search for "" yielded 788 results
Webinars
https://www.easypower.com/resources/webinars
Weekly Informational and Training Webinars At EasyPower, we offer a variety of weekly webinar sessions to help you become better acquainted with the software and to further develop your skills and understanding. There are two different types of webinars. The Tuesday Refresher webinars are short (30 minute) sessions going over…
What are Special-Purpose GFCIs?
https://www.easypower.com/resources/article/what-are-special-purpose-gfcis
Ground-fault circuit interrupters (GFCIs) have been a significant contributor to significantly reducing electrical fatalities in homes and commercial buildings over the last 5 decades. GFCI technology is now available for industrial and manufacturing facilities, and code updates and requirements are beginning to emerge for these devices. These new classes of…
What Changed in Low Voltage Arc Flash Analysis with IEEE 1584-2018?
With the removal of the “low voltage exception”, many facilities are looking at the possibility of a dramatically increased bus count for their latest update on their arc flash hazard assessment. What is driving this requirement and what choices could improve the cost of completing the arc flash study update?…
What Happened to HRC Category #0 and “Low voltage Exception”
The 2021 version of NFPA-70E does not permit labels to display both incident energy and PPE Category . This refresher webinar by Jim Chastain at EasyPower discusses how to deal with the label requirements if your labels are based on the HRC PPE categories from NFPA-70E 2012 or earlier.
What Happened to the ‘125 kVA Low Voltage Exemption’?
https://www.easypower.com/resources/article/what-happened-to-the-125-kvalow-voltage-exemption
In the original release of IEEE 1584-2002, there was language referring to the fact that systems below 240 VAC and supplied by transformers smaller than 125 kVA could be ‘disregarded’ as they presented virtually no risk of arc flash hazard. This ‘exemption’ has been replaced in the recently released IEEE…
What is the Difference Between Transient Motor Start and Impact Motor Start in EasyPower?
System designers of large industrial systems must consider the system perturbations that may occur during the process of starting large motor loads. This Refresher Webinar, presented by Jim Chastain at EasyPower, compares the results of two EasyPower modules: PowerFlow and Transient Motor Starting. He will demonstrate examples comparing these popular…
What Makes EasyPower’s ScenarioManager Stand Out in the Market?
Recently several new customers have made it a point of asking how EasyPower’s ScenarioManager works. It seems like the competition does not quite measure up. Maybe we have taken this useful EasyPower utility too lightly. ScenarioManager delivers powerful tools to model and analyze possible power system scenarios—without the hassle of…
What New in EasyPower 2025
https://www.easypower.com/resources/article/what-new-in-easypower-2025
We are pleased to announce that EasyPower 2025 is now available! This release introduces major enhancements, including database storage for short circuit and arc flash results, new elements-based short circuit method, and 64-bit support. Additional updates improve workflows, boost database performance, and expand features like one-line text templates, transformer impedance…
What’s New in EasyPower 10.0 Release
https://www.easypower.com/resources/article/whats-new-in-easypower-10.0-release
This webinar, given by Jim Chastain, an EasyPower Engineer, covers some of the new features in version 10.0 of EasyPower. Jim covers the extended support for the IEC-60909 standard in short circuit and protective device coordination. He explains how to create custom text templates and symbols for items on the…