Get up to speed on the fast and easy features of EasyPower with these comprehensive videos.
Arc Flash the Easy Way - Part 3: Modeling and Initial System Analysis
The third installment of this series focuses on the use of the EasyPower Arc Flash Suite #2 to construct the one-line model from the collected data and then proceeds to the initial steps required to calculated arc flash incident energies. Industry standards describing the use of the IEEE-1584 model are detailed and examples provided. This will be similar to the prior instances of this presentation, but updated to include techniques in EasyPower for comparing your electrical system using the IEEE 1584-2002 vs. 1584-2018 standard.
Arc Flash the Easy Way - Part 2: Data Collection
Of the overall time involved in an Arc Flash study, data collection can be the most costly if not properly planned. Eliminating the need for repeated trips to the site and avoiding excessive delays and cost is the focus for this presentation. Second in the Arc Flash Risk Assessment series, this presentation emphasizes the benefits that can be recognized both in cost reduction and employee education when facilities maintenance teams are part of the process. This updated presentation includes information on the many changes to data collection due to new calculation parameters in the IEEE 1584-2018 standard.
Arc Flash The Easy Way - Part 1: Regulations and Industry Standards
We kick of the first part of a 4-week series on how to meet NFPA compliance and control costs with a discussion of safety related to arc flash hazards and the evolution of regulator standards in the 15 years since their introduction. This will be similar to the prior instances of this presentation, but updated to include changes to the NFPA 70E-2021 standard.
Modern Connected Power Systems – Virtual Lab Demo
In this webinar, Duke Dunsford, Customer Experience Manager at Square D by Schneider Electric, walks you through a visit to Schneider Electric’s EcoStruxure Power Innovation Lab and so you can visually learn about the latest connected power system solutions. See first-hand how connected circuit breakers, meters, sensors, and application software can be leveraged for intelligent power systems. In the presentation you learn ways that continuous thermal monitoring maximizes uptime and reliability. You also learn how to design power systems to enable energy efficiency through connected technologies, as well as be able to list ways microgrid technologies can enhance efficiency and maximize uptime.
How Arc Flash PPE Impacts Both Human Performance and Human Error
In this webinar, given by Jim Pollard at Unlimited PPE Inc, he discusses how arc flash PPE can effectively reduce the severity of harm caused by an arc flash exposure. Advances in arc flash PPE technology have resulted in the availability of better designs that when used by a Qualified Electrical Worker can reduce the probability of an arc flash by minimizing human error and improving human performance.
EasyPower Scenario Manager – Up Close and Personal
Most projects benefit by comparing arc flash results using EasyPower’s Scenario Manager. In this Refresher webinar, Jim Chastain focuses on the added benefits received when you apply Scenario Manager in arc flash as well as short circuit and power flow studies.